The CRE3000 Equalizers # MR59ZR are a great choice for an equalizer upgrade, but there is not a specific hanger set that would go with them. I can definitely help and point you in the right direction. Now, I do not have a way to know specs on your hangers based on a make and model of camper. If only it were so easy!
When replacing hangers it is important that we get the height of the hanger correct. This was we can retain the factory ride height. For example part # 28-5 is a very common... view full answer...
Thank you for the photos and measurement!
We have a variety of slide out wiper seals that might work for your application but you'll want to look underneath/behind the seals you have pictured to make sure they don't have any other kind of design as well since that can change from slide out to slide out.
If you do indeed have a flat wiper seal then what we have that is closest to your seal is the 3" seal from Steele Rubber. Part # SR29FR gets you a 15' strip while part # SR56FR gets you... view full answer...
While we do not carry the Lippert Road Armor currently for triple axle setups I do have a couple kits for you to consider to replace the MORryde Rubber Equalizers # MR39ZR you have on your 2019 Heartland Cyclone 4270 Toy Hauler.
First is the Lippert Center Point by Trailair Air-Ride Suspension Upgrade # LC1565401. This will replace the rubber equalizers you have with an air cushioned suspension. It will allow you to be able to adjust the air pressure to fine tune your desired ride quality.... view full answer...
Your 2019 Heartland Cyclone model 4270 5th wheel is going to need the 35" Equalizers # MR39ZR like you found. You can verify this if you like by measuring from the center of the center wheel to the center of the front and rear axles. You will also need the MORryde Suspension Upgrade Kit # MR26ZR. view full answer...